Application area
The telescopic loading device is used to transfer dusty and granular bulk goods from silos into road container vehicles and railway dust containers. The loading of open vehicles and containers is possible with a special design. The products are handled dust-free if the device is connected to a filter system with 15 - 20 mbar negative pressure.
Essentially, the telescopic loading device consists of the upper part with pulley, venting nozzle, the flow shaft suspended by chains and the lower part. If required, a level limit switch can be fitted in the closing cone to prevent overfilling. A manual or motorised cable winch is used to raise and lower the appliance. The motorised cable winch is equipped with a special device that causes the extended telescopic loading device to move automatically when the vehicle settles into its springs due to the load of the filling. Depending on the application, the telescopic loading device can be made of mild steel or stainless steel. A combination of polyamide cones is also possible. The bellows are supplied in a special fabric depending on the intended use.
For size DN 200/88: approx. 100 m3/h
For size DN 200/88: approx. 150 m3/h. The throughput rate depends on the bulk material, the silo and the discharge aid
